How to install a mail slot in a security door.? - door security systems
I have a steel security door with two large panels and a small central panel, now swirls of metal. I have to install a mailbox in which the media field. Professional can not or do or wants to more than $ 300 per door (I 2). Can someone with a little knowledge can install a mailbox?
Thursday, January 7, 2010
Door Security Systems How To Install A Mail Slot In A Security Door.?
4 comments:
You might want to consider that on the side door through the wall, it is easier to apply and can not be so expensive.
You might want to consider that on the side door through the wall, it is easier to apply and can not be so expensive.
It can be done, but it will be difficult, dirty and dangerous if you do not know what you're doing.
They are a circular saw blade for cutting metal have (I use a leaf node) ablation. You need a hacksaw blade cutter or hacksaw.
Remove the hinge pin so that you can down the door and on easels in the open or in a basement place / garage. Use a square and a ruler to mark the area to reduce it. Put on your safety equipment (I foam plugs in the inner ear, a mask, a long-sleeved shirt or jacket flame retardant gloves, and thick leather). This will be high and sparks. Make sure that nothing flammable nearby. You need to make the saw cuts to come through the door. It is not easy when you do not know, like a circular saw. Cut the long sides of the slit-mail (above and below). Then with your saw, or saw, cut the short sides. Debar and clean the edges with a metal file and sandpaper.
You should be able to install the mailbox.
Good luck.
Can anyone install with a little knowledge can be a PO Box? yes
Post a Comment