Thursday, January 21, 2010

Wiring Diagram Alpine How To Wire My Alpine SWR-1242D Subwoofers To A 2-Ohm Load?

How to wire my Alpine SWR-1242D subwoofers to a 2-Ohm load? - wiring diagram alpine

I need a diagram or an explanation of how to connect to my 2 Alpine SWR-1242D subwoofers to an amplifier 2 ohm stable. Thank you!

3 comments:

Sparky34... said...

You can not because they DVCS 4 ohms. The only option you have is 1 ohm or 4 ohms with them.

1 Ohm - http://i81.photobucket.com/albums/j230/s ...

4 Ohms - (see chart).

At a load of 2 Ohms, 2 Ohm DVC have two cables so - http://i81.photobucket.com/albums/j230/s ...

Read more http://spkrbox1.spaces.live.com

i h said...

If the amplifier is a 2-channel amplifier, a speaker can both coils (parallel), connect one channel and the speakers of the other (both coils in parallel) on a different channel. That would have to be 2 ohms.

If the amplifier is a mono amplifier, was then set 2 Voice coil wire voice coil wire-Series woofers in the cabin and then the other 2 woofers in parallel together. This will give you a load of 4 ohms. If the amplifier has enough power that you'll be good with this configuration.

odinsrag... said...

His doubles partner, 4 ohm subs can be connected to 1 or 4 ohms. You need to have dual 2 ohm version to achieve a load), 2 ohm (a pair.

Post a Comment